22
SETUP
3. Using the Style and Demonstration disk
Here’s how to use the included “STYLE & DEMONSTRATION” disk.

Contents of the disk

• The included disk contains “STYLE,” “DEMO 1” and
“DEMO 2.”
• “DEMO 1” and “DEMO 2” allow you to enjoy demo play-
back, and to playback songs while adjusting the Play Ef-
fects or Multi to experience the possibilities of the QY700.
• “STYLE” allows you to restore the factory settings of the
QY700.

Listening to the demo playback

• Here’s how to load a demo song file from disk and enjoy
the demo playback.
• When “DEMO 1” or “DEMO 2” is loaded from disk, all
internal memory will be rewritten by the demo play-
back data. If internal memory contains any important
data that you wish to keep, save the data before load-
ing the demo.
1. With the label facing upward, insert the disk into the
floppy disk slot.
▼Insert the disk all the way until it clicks into place.
2. Press d.
▼You will enter Disk mode.
3. Press 2 (Load).
▼You will enter Load sub-mode, and the top line of the dis-
play will indicate “DISK -- LOAD --”.
4. Press d [D1] (All Data).
▼The Load All Data page will appear, and the filenames will
be displayed.
5. Use the cursor keys / data dial to move the cursor to
“DEMO 1” or “DEMO 2” and press e.
▼A message of “Are You Sure? (Y/N)” will appear, asking
whether it is OK to erase the data in internal memory and
load the data from disk.
• If you do not wish to erase the data currently in memory,
press n to halt loading. Then save the data in memory to
a disk, and perform the loading procedure once again. (→
p.307)