57
BASIC CONCEPTS
Chapter 1
1
Create patterns
Patterns to be created
Style 01, Section A
"intro"
Style 01, Section B
"normal1"
Style 01, Section C
"normal2"
Style 01, Section D
"
fill1
"
Style 01, Section E
"
fill2
"
Style 01, Section F
"
ending
"

Pattern creation procedure

• The procedure for creating a pattern will be explained as
we create the Style 01 Section A “intro” pattern.
1. Enter Pattern mode.
• Press p to enter Pattern mode.
2. Select a pattern.
(1)Move the cursor to the Style number or Section (→ p.202).
(2)Use the data dial, n/y or the numeric keypad → e to
select Style 01 and Section A.
3. Specify the number of measures in the pattern.
(1)Press d [D1] twice to move the cursor to the number
of measures.
(2)Use the data dial, n/y, or numeric keypad → e to set
the number of measures to 02.
4. Set the Section Connection (→ p.202).
(1)Move the cursor to Section Connection.
(2)Use the jog dial or n/y to set the Section Connection to
C.
5. Move the cursor to the location where the phrase or
rest will be entered.
• Refer to the diagram for the pattern you are creating, to
check the location where the phrase will be placed.
• First, move the cursor to M002 of track 1.
SHIFT F1 F2 F3 F4 F5 F6 SHIFT EXIT
Section connection
Style number Section Measure number [D1]