81Chapter 2. SONG MODE
2
The Play Effects submode allows you to adjust various song-
play parameters, including quantizing, gate timing, and ve-
locity. This makes it possible to control and adjust timing
and articulation while playback is in progress. Note that
these adjustments do not cause changes in your recorded
data.
Song playback remains available while you are in the Play
Effects submode. In particular, the p, s, t, r, and
f keys continue to function normally.
If you want to modify the actual recorded data to reflect
your Play Effects adjustments, you can do so using the Nor-
malize Play Effects song job. ( p.163.)
Each song stores its own Play Effect settings. When you
change to a different song, the new song’s settings auto-
matically become effective.
The Play Effects submode comprises three main pages to-
gether with two supplementary pages. You access the main
pages by pressing the appropriate function keys (1,
2, 3). You can access the supplementary page
(where available) by pressing 4.
1(Groove) displays the “Groove Quantize” page. You
use this page to set up the rhythm quantizing for each track.
2(Shf|GT|Vel) selects the “Clock Shift, Gate Time,
and Velocity” page. You use this page to set the correspond-
ing values. Again, values are set separately for each track.
3(Transpose) selects the “Transpose” page. You use
this page to set transposition values for each track. You
also use it to access the “Drum Table Edit” page; see be-
low.
6{(TR1~16) or (TR17~32)} switches the tracks dis-
played on the current page.
4(GrovView), accessible only from the “Groove
Quantize” page, switches the display to the “Groove View”
page. You use the “Groove View” page to view the groove
templates, and to view or adjust your user templates.
4(DrTabEdit), accessible only from the “Transpose”
page, switches you to the “Drum Table Edit” page. Y ou can
then use this page to adjust drum table settings.
1. At the SONG PLAY screen, press 1 (PlayFx).
The QY700 enters the Play Effects submode.
2. If necessary, change the page by pressing the appro-
priate function key: 1 (Groove), 2
(Shf|GT|Vel), or 3 (Transpose).
Note that the screen only has room to display 16 tracks
(tracks 1 to 16, or tracks 17 to 32). You can toggle between
these two groupings by pressing 6.
3. After making the necessary settings, presse to
return to the main SONG PLAY screen.
Editing Shortcut 1: You can simultaneously adjust values
for all 32 tracks by an equal amount by holding down the
s key while rotating the data dial or pressing n or
y .
Editing Shortcut 2: You can set all values for all 32 tracks to
the same value by holding downs, then entering the
value at the numeric keypad.
2. Play Effects