157
2
Chapter 2. SONG MODE
JOB 14 THIN OUT
7. Song Jobs
• You use this job to remove some occurrences of a specified
non-note event within the designated segment of a selected
track. The purpose is to reduce the data volume and free up
additional memory.
• Specifically, the job will remove every other occurrence of
the event in areas where the event recurs within 60 clock
cycles. The job will not remove an event that is separated
from the previous occurrence by at least 60 clock cycles.
1. Track setting
• The TR value selects the target track.
0101
1101
01,...,32, Tmp
• 01,...,32 Sequence track
• Tmp TEMPO track
2. Segment
• The two boxes to the right of the M select the track segment
to be thinned.
0101
1101
Measure: beat 001:1,...,999:8

3. Event

• The bottom pair of boxes select the targeted event type.
• Note that these settings are available only when you are
working on a sequence track. If you have selected the
TEMPO track, the QY700 will automatically target tempo-
change events.
0101
1101
PB, CC (000,...,127), CAT, PAT
•PB Pitch bend
• CC(000,...,127) Control change (Any single control-
change message type, 000 to 127)
•CAT Channel aftertouch
•PAT Polyphonic aftertouch