Yamaha QY700 About effect mode

188 Chapter 4. EFFECT MODE
About effect mode
About effect mode
• In Effect mode, you can select the effects used in a song
and modify effect settings.
• Effect mode does not have a “top” page which always ap-
pears first when you press the MODE key. (The previously-
selected page will appear.)
• Effect mode has four sub-mode pages, and these are se-
lected by the 1 – 4 function keys.
Pressing 1 (Connect) accesses the Connection page.
Here you can specify the connection mode, the Effect Type
for each effect, and the return levels etc. (→ p.190)
Pressing 2 (Reverb) accesses the Reverb Edit page.
Here you can select the Reverb Type, and make reverb pa-
rameter settings. (→ p.193)
Pressing 3 (Chorus) accesses the Chorus Edit page.
Here you can select the Chorus Type, and make chorus pa-
rameter settings. (→ p.193)
Pressing 4 (Vari.) accesses the Variation Edit page.
Here you can select the Variation Type, and make v ariation
parameter settings. (→ p.193)
• The structure of the QY700’s effects is greatly dependent
on the Variation Mode setting of the Connection page.
• If exclusive messages such as “GM Mode On” or “XG Sys-
tem On” that make effect settings are included in a song,
settings made in Effect mode or by control changes will be
ignored.
• If you want the settings of Effect mode to be reflected in the
data, highlight XG Header in the Save page of Disk mode
when saving the song to a Standard MIDI File etc. (→ p.307)
• For details on Variation mode and effect structure, refer to
“Chapter 1. BASIC CONCEPTS” (→ p.47).
2Reverb edit
3Chorus edit
4Variation edit
eEffect mode
1Ê Connection