172 Chapter 3. VOICE MODE

1. Use d/u or the cursor keys to
move the cursor to the desired track.
2. Press m, and the display will indicate and the
track will be muted.
If you press m once again for a muted track, it will be
un-muted.
3. Press s, and the display will indicate and all
other tracks will be displayed as dashed lines, and only
the sound of the track located at the cursor will be
heard.
When a track is being soloed, moving the cursor to another
track and pressing s will switch the soloed track. In
this way, you can successively audition the playback of each
track.
When a track is being soloed, moving the cursor to another
track and pressing s + s will add the selected
track to the playback, allowing you to solo two or more
tracks.
4. When you press s on a soloed track, all solo set-
tings will be canceled simultaneously.
When you press s + s on a soloed track, solo
will be canceled only for that track.
5. Voice category
• Voice Category allows you to change the Bank Select MSB
value to specify the general category of the voice.
• Normal Voice is the voice category that specifies normal
voices (instrumental sounds). Specify a Bank Select MSB
of 000.
• SFX Voice is a voice category that specifies sound effects.
Sounds effects in this category change their pitch when
played from different notes of the keyboard. Specify a Bank
Select MSB of 064.
• SFX Kit is a voice category that specifies sound effects.
Sounds effects in this category produce a different type of
sound effect for each note of the keyboard, similarly to a
drum voice. Specify a Bank Select MSB of 126.
• Drum Voice is the voice category that specifies drum voices.
In this category, you can specify Drum Voice for two or
more parts, and select a different drum set voice for each
part. However it is not possible to modify the drum sounds.
Specify a Bank Select MSB of 127.
• Drum S1 and Drum S2 are voice categories that specify
Drum Setups. The drum voices in this category can be modi-
fied using Drum Setup Edit. However if Drum S1 is speci-
fied for two or more parts, selecting a drum set voice or
modifying the sound for one of the parts will automatically
change the settings for the other parts as well.
0101
1101
Normal Voice
SFX Voice
SFX Kit
Drum Voice
Drum Setup 1
Drum Setup 2
Off Part off
6. Program number
• Program Number specifies the voice number that will be
used by each part.
• Voices are selected by three values: Voice Category, Bank
Number (see following item) and Program Number.
• A voice icon will be displayed at the cursor location. The
data display location will show the specified program
number and the name of the selected voice.
• The available program numbers will depend on the Voice
Category.
• During playback, this setting will change according to the
Program Change data that was recorded into each track of
the sequencer block.
0101
1101
001–128
• For details on voice selection, refer to “Chapter 1. BASIC
CONCEPTS”. (→ p.43)
• For voice names and numbers, refer to the separate “QY700
Reference Listings”.
1. Mixer