261Chapter 5. PATTERN MODE

5
3. Set all
0101
1101
Off (0), 001,...,127
4. Rate
0101
1101
000%,...,100%,...,200%
5. Offset
0101
1101
-99,...,+00,...,+99
7. Pattern Jobs
Job 02 Modify Velocity
• This job alters the velocity values of the specified range of
notes (pitches) in the specified segment of the designated
user phrase. Remember that velocity refers to the force with
which a note is struck. The precise effect of a velocity change
varies according to the voice: in most cases a higher veloc-
ity produces a louder sound.
• Using this job, you can choose to set all targeted notes to an
identical velocity value, or you can apply a relative (linear)
adjustment to the original velocity values.
• If making a relative adjustment, you use two parameters:
the Rate and the Offset. The Rate value applies a propor-
tional change to the velocity value, while the Offset value
(which is applied after the Rate adjustment) adds a fixed
value. The relation is as follows:
Adjusted velocity = (original velocity X Rate) + Offset.
• If the adjustment result is less than 1, the QY700 sets the
value to 1. If the result is higher than 127, the QY700 sets
the value to 127.
• For full information about this job’s parameters and opera-
tion, refer to the explanation for the SONG-mode version
of the job, on page 145. But note that the PATTERN-mode
job applies to a user phrase rather than a sequence track,
and that maximum segment length for a phrase is 256 meas-
ures.
1. Phrase
• The Phrase value selects the user phrase to be adjusted.
0101
1101
01,...,99
2. Segment and notes
0101
1101
Measure: beat 001:1,...,256:8
Note range C-2,...,G8