![To Enter PULL DOWN DEMAND Setpoint: (Refer to Fig. 8.)](/images/new-backgrounds/34957/3495731x1.webp)
To Enter PULL DOWN DEMAND Setpoint: (Refer to Fig. 8.)
1.Press and release PULL DOWN DEMAND setpoint key. The following program prompt message is dis- played:
SETPOINT = XXX MIN @ XXX % FLA, XXX MIN LEFT
2.Use Entry keys to enter desired values. For expla- nation, see PULL DOWN DEMAND, page 12. Note that “XX min left” is not an operator entered value.
3.Press and release ENTER key.
PROGRAM MODE, SELECT SETPOINT |
|
message is displayed. | LD00957 |
FIG. 8 – KEYPAD – PROGRAMMING “PULL DOWN
DEMAND” SETPOINT
To Enter CLOCK Setpoint: (Refer to Fig. 9.)
1.Assure Micro Board Program jumper J57 is in “CLKON” position.
2.Press and release CLOCK setpoint key. The follow- ing program prompt message is displayed:
TODAY IS MON 10:30 PM 1/1/92
3.Press ADVANCE DAY / SCROLL key until the pro- gram per day of week appears on the display.
4.Use Entry keys to enter proper time of day.
5.Press AM/PM key to change the AM to PM or vice versa.
6.Use Entry keys to enter proper calendar date,
(MONTH/DAY/YR). If month and day are single digit | LD00958 | |||
| ||||
entries, precede the entry with “0”. For example, |
| |||
02/04/88. |
|
| ||
7. Press and release ENTER key. | FIG. 9 – KEYPAD – PROGRAMMING “CLOCK” | |||
SETPOINT | ||||
|
|
| ||
| PROGRAM MODE, SELECT SETPOINT |
|
| |
| message is displayed. |
| ||
|
|
|
|
16 | YORK INTERNATIONAL |