Memory Cards
CompactFlash Card
5.Insert the CompactFlash card into the card slot on the upper portion of the option board. Insert the card with the back (unlabeled) side of the card facing out. The card can be inserted only one way and should snap into place.
Figure 39 shows where to insert the CompactFlash card.
Figure 39 • Compact Flash Card Insertion
1 | 2 | 3 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Option board
2Card slot
3Compact flash card
6.Reinstall the electronics cover by lowering the cover so the lip of the cover goes into the channel on the top of the printer.
7.Secure the cover by reinstalling the two screws near the bottom of the cover.
8.Reconnect the printer AC power cord.
9.Press and hold CANCEL while turning the printer On (I). The printer prints a configuration label.
10.Check for the presence of additional memory or optional fonts by looking at the information on the configuration label.
Note • The CompactFlash card may take a few minutes to initialize. If the process is not successfully completed within 10 minutes, contact Technical Support at http://www.zebra.com/SS/service_support.htm for assistance.
RXiIIIPlus User Guide | 87 |