Zebra Technologies XiIIIPlus Sensors, Ribbon and Label-AvailableSensor Locations

Routine Maintenance

Clean Interior

Sensors

Brush or vacuum any accumulated paper lint and dust off the sensors whenever the sensors are blocked. At minimum, clean the sensors according to the recommendations in Cleaning Schedule on page 90.

Ribbon and Label-Available Sensor Locations

The ribbon sensor and optional label-available sensor are shown in Figure 41.

Figure 41 • Sensor Locations

1

2

1Label-available sensors

2Ribbon sensor

23063L-001 Rev. 2 6/21/2004 RXiIIIPlus User Guide 93