Front Panel Controls

 

 

 

Front Panel LCD

 

 

 

Table 5 • Printer Parameters (Sheet 10 of 15)

 

 

 

Parameter

Action/Explanation

 

 

 

FORMAT

Format Prefix Character

PREFIX

The format prefix is a two-digit hex value used as a parameter place marker in ZPL/ZPL II

 

format instructions. The printer looks for this 2-digit hex character to indicate the start of a

 

ZPL/ZPL II format instruction. See the ZPL II Programming Guide Volume I for more

 

information.

 

Note • Do not use the same hex value for the control, format, and delimiter character. The

 

printer must see different characters to work properly.

 

1. Press the left oval to move to the next digit position.

 

2. Press the right oval to increase the value of the digit.

 

Default: 5E (caret)

 

Range: 00 to FF

 

 

 

DELIMITER

Delimiter Character

CHAR

The delimiter character is a 2-digit hex value used as a parameter place marker in

 

ZPL/ZPL II format instructions. See the ZPL II Programming Guide Volume I for more

 

information.

 

Note • Do not use the same hex value for the control, format, and delimiter character. The

 

printer must see different characters to work properly.

 

1. Press the left oval to move to the next digit position.

 

2. Press the right oval to increase the value of the digit.

 

Default: 2C (comma)

 

Range: 00 to FF

 

 

 

ZPL MODE

Selecting ZPL Mode

 

The printer remains in the selected mode until it is changed by this front panel instruction

 

or by using a ZPL/ZPL II command. The printer accepts label formats written in either

 

ZPL or ZPL II. This eliminates the need to rewrite any ZPL formats you already have. See

 

the ZPL II Programming Guide for more information on the differences between ZPL and

 

ZPL II.

 

• Press the right or left oval to display other choices.

 

Default: ZPL II

 

Selections: ZPL II, ZPL

 

 

 

 

23063L-001 Rev. 2 6/21/2004

RXiIIIPlus User Guide

53