Front Panel Controls

Front Panel LCD

Table 5 • Printer Parameters (Sheet 14 of 15)

Parameter Action/Explanation

WEB S .

MEDIA S .

RIBBON S .

MARK S .

TAKE LABEL

MARK MED S .

MEDIA LED

RIBBON LED

MARK LED

These parameters are automatically set during the calibration procedure. They should be changed only by a qualified service technician. See the Maintenance Manual for more information on these parameters.

• Press NEXT/SAVE to scroll through these parameters.

LCD

ADJUST

LCD Adjustment

 

 

This parameter allows you to adjust the contrast of your LCD if it is difficult to read.

 

 

1. Press the left oval to move the cursor.

 

 

2. Press the right oval to toggle +/- or to increase the value of the digit.

 

 

Range: 00 to 19

 

 

FORMAT

Format Convert

CONVERT

Selects the bitmap scaling factor. The first number is the original dots per inch (dpi) value;

 

 

the second, the dpi to which you would like to scale.

 

 

Note • Not applicable on all printers.

 

 

• Press the right or left oval to display other choices.

 

 

Default: None

 

 

Selections: None, 150 → 300, 150 → 600, 200 → 600, 300 → 600

 

 

 

IDLE

DISPLAY

Idle Display

 

 

This parameter selects the LCD options for the real-time clock.

 

 

Note • If the default value is not selected, pressing either oval briefly displays the

 

 

firmware version of the printer.

 

 

• Press the right or left oval to display other choices.

 

 

Default: Firmware version

 

 

Selections: mm/dd/yy (24 hour), mm/dd/yy (12 hour), dd/mm/yy (24 hour), dd/mm/yy

 

 

(12 hour)

 

 

 

RTC

DATE

RTC (Real-time clock) Date

 

 

This parameter allows you to set the date following the convention selected in IDLE

 

 

DISPLAY.

1. Press the left oval to move to the next digit position.

2. Press the right oval to increase the value of the digit.

23063L-001 Rev. 2 6/21/2004

RXiIIIPlus User Guide

57