Printer Operation
Load the Printer
Load Fanfold Media
Fanfold media feeds through either the bottom or rear access slot from outside the printer. The media hanger and media supply spindle are not used with fanfold media.
To load fanfold labels, complete these steps:
1.Slide the printhead lever to the Open position.
2.Slide the media guide as far from the printer frame as possible.
3.How do you want to feed the fanfold labels?
•From the bottom slot in the printer body.
Figure 16 shows the printer with fanfold labels loaded through the bottom slot.
Figure 16 • Fanfold
1
2
3
1Printhead lever (shown in the Open position)
2Media guide
3Fanfold labels
24 | RXiIIIPlus User Guide | 6/21/2004 |