Chapter 9 VLAN

 

 

 

 

 

Table 23

Advanced Application > VLAN > Static VLAN (continued)

 

LABEL

 

DESCRIPTION

 

Tagging

 

Select TX Tagging if you want the port to tag all outgoing frames transmitted with this

 

 

 

VLAN Group ID.

 

 

 

 

 

Add

 

Click Add to save your changes to the Switch’s run-time memory. The Switch loses these

 

 

 

changes if it is turned off or loses power, so use the Save link on the top navigation panel to

 

 

 

save your changes to the non-volatile memory when you are done configuring.

 

 

 

 

 

Cancel

 

Click Cancel to begin configuring this screen afresh.

 

 

 

 

 

Clear

 

Click Clear to start configuring the screen again.

 

 

 

 

 

VID

 

This field displays the ID number of the VLAN group. Click the number to edit the VLAN

 

 

 

settings.

 

 

 

 

 

Active

 

This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).

 

 

 

 

 

Name

 

This field displays the descriptive name for this VLAN group.

 

 

 

 

 

Delete

 

Click Delete to remove the selected entry from the summary table.

 

 

 

 

 

Cancel

 

Click Cancel to clear the Delete check boxes.

 

 

 

 

9.5.4 Configure VLAN Port Settings

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port. See Section 9.1 on page 99 for more information on static VLAN. Click the VLAN Port Setting link in the VLAN Status screen.

Figure 43 Advanced Application > VLAN > VLAN Port Setting

The following table describes the labels in this screen.

Table 24 Advanced Application > VLAN > VLAN Port Setting

LABEL

DESCRIPTION

GVRP

GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for

 

switches to register necessary VLAN members on ports across the network.

 

Select this check box to permit VLAN groups beyond the local Switch.

 

 

Port

This field displays the port number.

 

 

 

105

ES3500 Series User’s Guide