ZyXEL Communications ES3500 Series 6.3How to Use PPPoE IA on the Switch, Click the, 1Client A is connected to the Switch’s port 2 in VLAN

Chapter 6 Tutorials

5Click Apply to save your changes back to the run-time memory.

6Click the Save link in the upper right corner of the web configurator to save your configuration permanently.

7The DHCP server can then assign a specific IP address based on the DHCP request.

6.2.4Troubleshooting

Check the client A’s IP address. If it did not receive the IP address 172.16.1.18, make sure:

1Client A is connected to the Switch’s port 2 in VLAN 102.

2You configured the correct VLAN ID, port number and system name for DHCP relay on both the DHCP server and the Switch.

3You clicked the Save link on the Switch to have your settings take effect.

6.3How to Use PPPoE IA on the Switch

You want to configure PPPoE Intermediate Agent on the Switch (A) to pass a subscriber’s information to a PPPoE server (S). There is another switch (B) between switch A and server S.

	59
ES3500 Series User’s Guide