Chapter 6 Tutorials

9Enter 102 in the PVID field for port 2 to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines.

10Click Apply to save your changes back to the run-time memory.

11Click the Save link in the upper right corner of the web configurator to save your configuration permanently.

6.2.3Configuring DHCP Relay

Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent information (such as the VLAN ID) to DHCP requests.

1Click IP Application > DHCP and then the Global link to open the DHCP Relay screen.

2Select the Active check box.

3Enter the DHCP server’s IP address (192.168.2.3 in this example) in the Remote DHCP Server 1 field.

4Select the Option 82 and the Information check boxes.

58

 

ES3500 Series User’s Guide