ZyXEL Communications ES3500 Series 39.11 Remote Management, the, Apply, Click, Active, Cancel, Timeout, Services, Service Port, that service, to view the screen as shown

Chapter 39 Access Control

the Remote Management screen (discussed later). Click Management > Access Control > Service Access Control to view the screen as shown.

Figure 194 Management > Access Control > Service Access ControlThe following table describes the fields in this screen.Table 136 Management > Access Control > Service Access Control

LABEL	DESCRIPTION
Services	Services you may use to access the Switch are listed here.
Active	Select this option for the corresponding services that you want to allow to access the Switch.
Service Port	For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default service port by
	typing the new port number in the Server Port field. If you change the default port number
	then you will have to let people (who wish to use the service) know the new port number for
	that service.
Timeout	Type how many minutes a management session (via the web configurator) can be left idle
	before the session times out. After it times out you have to log in with your password again.
	Very long idle timeouts may have security risks.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel to
	save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.

39.11 Remote Management

Click Management > Access Control > Remote Management to view the screen as shown next.

	315
ES3500 Series User’s Guide