ZyXEL Communications ES3500 Series MAC, PHY, MAX, MIN, MAX, MIN, MAX, MIN, Unit, BOARD, (RPM), only), Status, Status, Status, Normal, Version, created, Address, Current, Current, Current

Chapter 8 Basic Setting

The following table describes the labels in this screen.

Table 13 Basic Setting > System Info

LABEL	DESCRIPTION
System Name	This field displays the descriptive name of the Switch for identification purposes.
Product Model	This field displays the model number of the Switch.
ZyNOS F/W	This field displays the version number of the Switch 's current firmware including the date
Version	created.
Ethernet	This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
Address
Hardware Monitor
Temperature	The Switch has temperature sensors that are capable of detecting and reporting if the
Unit	temperature rises above the threshold. You may choose the temperature unit (Centigrade or
	Fahrenheit) in this field.
Temperature	BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
	printed circuit board.
Current	This shows the current temperature at this sensor.
MAX	This field displays the maximum temperature measured at this sensor.
MIN	This field displays the minimum temperature measured at this sensor.
Threshold	This field displays the upper temperature limit at this sensor.
Status	This field displays Normal for temperatures below the threshold and Error for those above.
Fan Speed	A properly functioning fan is an essential component (along with a sufficiently ventilated,
(RPM)	cool operating environment) in order for the device to stay within the temperature
(ES3500-24HP	threshold. Each fan has a sensor that is capable of detecting and reporting if the fan speed
	falls below the threshold shown.
only)
Current	This field displays this fan's current speed in Revolutions Per Minute (RPM).
MAX	This field displays this fan's maximum speed measured in Revolutions Per Minute (RPM).
MIN	This field displays this fan's minimum speed measured in Revolutions Per Minute (RPM).
	"<41" is displayed for speeds too small to measure.
Threshold	This field displays the minimum speed at which a normal fan should work.
Status	Normal indicates that this fan is functioning above the minimum speed. Error indicates that
	this fan is functioning below the minimum speed.
Voltage (V)	The power supply for each voltage has a sensor that is capable of detecting and reporting if
	the voltage falls out of the tolerance range.
Current	This is the current voltage reading.
MAX	This field displays the maximum voltage measured at this point.
MIN	This field displays the minimum voltage measured at this point.
Threshold	This field displays the percentage tolerance of the voltage with which the Switch still works.
Status	Normal indicates that the voltage is within an acceptable operating range at this point;
	otherwise Error is displayed.

	85
ES3500 Series User’s Guide