ZyXEL Communications ES3500 Series 36.4 DSCP-to-IEEE802.1p Priority Settings, Red, 0 –, 8 –, 16 –, 24 –, 32 –, 40 –, 48 –, 56 –, Green, Yellow, Delete, Delete, Cancel, profile, Profile, DiffServ

Chapter 36 Differentiated Services

Table 116	IP Application > DiffServ > 2-rate 3 Color Marker > DSCP Profile (continued)
LABEL	DESCRIPTION
Green	This field displays the DSCP value to use for packets with low packet loss priority in this profile.
Yellow	This field displays the DSCP value to use for packets with medium packet loss priority in this
	profile.
Red	This field displays the DSCP value to use for packets with high packet loss priority in this profile.
Delete	Select the profile(s) that you want to remove.
Profile
Delete	Click Delete to remove the selected profile(s) from the summary table.
Cancel	Click Cancel to clear the Delete check boxes.

36.4 DSCP-to-IEEE 802.1p Priority Settings

You can configure the DSCP to IEEE 802.1p mapping to allow the Switch to prioritize all traffic based on the incoming DSCP value according to the DiffServ to IEEE 802.1p mapping table.

The following table shows the default DSCP-to-IEEE802.1p mapping.Table 117 Default DSCP-IEEE 802.1p Mapping

DSCP VALUE	0 – 7	8 – 15	16 – 23	24 – 31	32 – 39	40 – 47	48 – 55	56 – 63
IEEE 802.1p	0	1	2	3	4	5	6	7

36.4.1 Configuring DSCP Settings

To change the DSCP-IEEE 802.1p mapping click the DSCP Setting link in the DiffServ screen to display the screen as shown next.

Figure 164 IP Application > DiffServ > DSCP Setting

276
	ES3500 Series User’s Guide