ZyXEL Communications ES3500 Series 33.2 Configuring Private VLAN, Add, Name, Name, VLAN, Clear, Index, Active, Cancel, Active, Delete, button, Cancel, VLAN ID, are done configuring

Chapter 33 Private VLAN

33.2 Configuring Private VLAN

Click Advanced Application > Private VLAN in the navigation panel to display the screen as shown.

Figure 153 Advanced Application > Private VLAN

The following table describes the labels in this screen.

Table 111 Advanced Application > Private VLAN

LABEL	DESCRIPTION
Active	Check this box to enable private VLAN in a VLAN.
Name	Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
VLAN ID	Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.
Add	Click Add to insert the entry in the summary table below and save your changes to the Switch’s
	run-time memory. The Switch loses these changes if it is turned off or loses power, so use the
	Save link on the top navigation panel to save your changes to the non-volatile memory when you
	are done configuring.
Cancel	Click Cancel to reset the fields to your previous configuration.
Clear	Click Clear to clear the fields to the factory defaults.
Index	This is the index number of the rule.
Active	This shows whether this rule is activated or not.
Name	This is the descriptive name for this rule.
VLAN	This is the VLAN to which this rule is applied.
Delete	Check the rule(s) that you want to remove in the Delete column and then click the Delete
	button.
Cancel	Click Cancel to clear the Delete check boxes.

264
	ES3500 Series User’s Guide