ZyXEL Communications ES3500 Series 42.3 Clustering Management Configuration, Name, Active, Clustering Manager, characters (spaces are allowed), ( ) appears in the member summary list below

Chapter 42 Cluster Management

42.3 Clustering Management Configuration

Use this screen to configure clustering management. Click Management > Cluster Management > Configuration to display the next screen.

Figure 203 Management > Cluster Management > Configuration

The following table describes the labels in this screen.

Table 145 Management > Cluster Management > Configuration

LABEL	DESCRIPTION
Clustering Manager
Active	Select Active to have this Switch become the cluster manager switch. A cluster can
	only have one manager. Other (directly connected) switches that are set to be cluster
	managers will not be visible in the Clustering Candidates list. If a switch that was
	previously a cluster member is later set to become a cluster manager, then its Status is
	displayed as Error in the Cluster Management Status screen and a warning icon
	( ) appears in the member summary list below.
Name	Type a name to identify the Clustering Manager. You may use up to 32 printable
	characters (spaces are allowed).

	325
ES3500 Series User’s Guide