ZyXEL Communications ES3500 Series Apply, Index, Apply, Delete, Cancel, Server, Delete, Cancel, Timeout, UDP Port, Accounting, IP Address, Shared Secret, Shared Secret

	Chapter 25 AAA
Table 73 Advanced Application > AAA > RADIUS Server Setup (continued)
LABEL	DESCRIPTION
Shared Secret	Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
	external RADIUS server and the Switch. This key is not sent over the network. This key must
	be the same on the external RADIUS server and the Switch.
Delete	Select this box if you want to remove an existing RADIUS server entry from the Switch. This
	entry is deleted when you click Apply.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel to
	save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.
Accounting	Use this section to configure your RADIUS accounting server settings.
Server
Timeout	Specify the amount of time in seconds that the Switch waits for an accounting request
	response from the RADIUS accounting server.
Index	This is a read-only number representing a RADIUS accounting server entry.
IP Address	Enter the IP address of an external RADIUS accounting server in dotted decimal notation.
UDP Port	The default port of a RADIUS accounting server for accounting is 1813. You need not change
	this value unless your network administrator instructs you to do so.
Shared Secret	Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
	external RADIUS accounting server and the Switch. This key is not sent over the network.
	This key must be the same on the external RADIUS accounting server and the Switch.
Delete	Check this box if you want to remove an existing RADIUS accounting server entry from the
	Switch. This entry is deleted when you click Apply.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel to
	save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.

	205
ES3500 Series User’s Guide