ZyXEL Communications ES3500 Series 41.3 Syslog Server Setup, Add, Clear, Index, Syslog, Active, Cancel, Active, server, Delete, Cancel, Log Level, Log Level, Management, IP Address

Chapter 41 Syslog

41.3 Syslog Server Setup

Click Management > Syslog > Syslog Server Setup to view the screen as shown next. Use this screen to configure a list of external syslog servers.

Figure 198 Management > Syslog > Syslog Server Setup

The following table describes the labels in this screen.

Table 141 Management > Syslog > Syslog Server Setup

LABEL	DESCRIPTION
Active	Select this check box to have the device send logs to this syslog server. Clear the check
	box if you want to create a syslog server entry but not have the device send logs to it
	(you can edit the entry later).
Server Address	Enter the IP address of the syslog server.
Log Level	Select the severity level(s) of the logs that you want the device to send to this syslog
	server. The lower the number, the more critical the logs are.
Add	Click Add to save your changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel
	to save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.
Clear	Click Clear to return the fields to the factory defaults.
Index	This is the index number of a syslog server entry. Click this number to edit the entry.
Active	This field displays Yes if the device is to send logs to the syslog server. No displays if the
	device is not to send logs to the syslog server.
IP Address	This field displays the IP address of the syslog server.
Log Level	This field displays the severity level of the logs that the device is to send to this syslog
	server.
Delete	Select an entry’s Delete check box and click Delete to remove the entry.
Cancel	Click Cancel to begin configuring this screen afresh.

320
	ES3500 Series User’s Guide