Chapter 8 Basic Setting

 

 

 

 

Table 14 Basic Setting > General Setup (continued)

 

LABEL

DESCRIPTION

 

New Time

Enter the new time in hour, minute and second format. The new time then appears in the

 

(hh:min:ss)Current Time field after you click Apply.

 

 

 

 

Current DateThis field displays the date you open this menu.

 

 

 

 

New Date (yyyy-

Enter the new date in year, month and day format. The new date then appears in the

 

mm-dd)Current Date field after you click Apply.

 

 

 

 

Time Zone

Select the time difference between UTC (Universal Time Coordinated, formerly known as

 

 

GMT, Greenwich Mean Time) and your time zone from the drop-down list box.

 

 

 

 

Daylight Saving

Daylight saving is a period from late spring to early fall when many countries set their

 

Time

clocks ahead of normal local time by one hour to give more daytime light in the evening.

 

 

Select this option if you use Daylight Saving Time.

 

 

 

 

Start Date

Configure the day and time when Daylight Saving Time starts if you selected Daylight

 

 

Saving Time. The time is displayed in the 24 hour format. Here are a couple of examples:

 

 

Daylight Saving Time starts in most parts of the United States on the second Sunday of

 

 

March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.

 

 

local time. So in the United States you would select Second, Sunday, March and 2:00.

 

 

Daylight Saving Time starts in the European Union on the last Sunday of March. All of the

 

 

time zones in the European Union start using Daylight Saving Time at the same moment

 

 

(1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March

 

 

and the last field depends on your time zone. In Germany for instance, you would select

 

 

2:00 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).

 

 

 

 

End Date

Configure the day and time when Daylight Saving Time ends if you selected Daylight

 

 

Saving Time. The time field uses the 24 hour format. Here are a couple of examples:

 

 

Daylight Saving Time ends in the United States on the first Sunday of November. Each

 

 

time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in

 

 

the United States you would select First, Sunday, November and 2:00.

 

 

Daylight Saving Time ends in the European Union on the last Sunday of October. All of the

 

 

time zones in the European Union stop using Daylight Saving Time at the same moment (1

 

 

A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October

 

 

and the last field depends on your time zone. In Germany for instance, you would select

 

 

2:00 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).

 

 

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these

 

 

changes if it is turned off or loses power, so use the Save link on the top navigation panel

 

 

to save your changes to the non-volatile memory when you are done configuring.

 

 

 

 

CancelClick Cancel to begin configuring this screen afresh.

 

 

 

8.4 Introduction to VLANs

A VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networks. Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a device cannot directly talk to or hear from devices that are not in the same group(s); the traffic must first go through a router.

In MTU (Multi-Tenant Unit) applications, VLAN is vital in providing isolation and security among the subscribers. When properly configured, VLAN prevents one subscriber from accessing the network resources of another on the same LAN, thus a user will not see the printers and hard disks of another user in the same building.

 

87

ES3500 Series User’s Guide