ZyXEL Communications ES3500 Series PoE, AAA, VLAN, Port, Switch, Control, Control, Protocol, stacking, Filtering, Bandwidth, Mirroring, Multicast, Tunneling, Static MAC, Forwarding, Forwarding

	Chapter 4 The Web Configurator
Table 8 Navigation Panel Links (continued)
LINK	DESCRIPTION
PoE	This link takes you to a screen where you can configure the Switch to supply
	power over Ethernet.
Advanced Application
VLAN	This link takes you to screens where you can configure port-based or 802.1Q
	VLAN (depending on what you configured in the Switch Setup menu). You can
	also configure a protocol based VLAN or a subnet based VLAN in these screens.
Static MAC	This link takes you to screens where you can configure static MAC addresses for a
Forwarding	port. These static MAC addresses do not age out.
Static Multicast	This link takes you to a screen where you can configure static multicast MAC
Forwarding	addresses for port(s). These static multicast MAC addresses do not age out.
Filtering	This link takes you to a screen to set up filtering rules.
Spanning Tree	This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to
Protocol	prevent network loops.
Bandwidth	This link takes you to screens where you can cap the maximum bandwidth
Control	allowed on a port.
Broadcast Storm	This link takes you to a screen to set up broadcast filters.
Control
Mirroring	This link takes you to screens where you can copy traffic from one port or ports to
	another port in order that you can examine the traffic from the first port without
	interference.
Link Aggregation	This link takes you to screen where you can logically aggregate physical links to
	form one logical, higher-bandwidth link.
Port	This link takes you to a screen where you can configure IEEE 802.1x port
Authentication	authentication as well as MAC authentication for clients communicating via the
	Switch.
Port Security	This link takes you to a screen where you can activate MAC address learning and
	set the maximum number of MAC addresses to learn on a port.
Classifier	This link takes you to a screen where you can configure the Switch to group
	packets based on the specified criteria.
Policy Rule	This link takes you to a screen where you can configure the Switch to perform
	special treatment on the grouped packets.
Queuing Method	This link takes you to a screen where you can configure queuing with associated
	queue weights for each port.
VLAN Stacking	This link takes you to screens where you can activate and configure VLAN
	stacking.
Multicast	This link takes you to screen where you can configure various multicast features,
	IGMP snooping and create multicast VLANs.
AAA	This link takes you to a screen where you can configure authentication,
	authorization and accounting services via external servers. The external servers
	can be either RADIUS (Remote Authentication Dial-In User Service) or TACACS+
	(Terminal Access Controller Access-Control System Plus).
IP Source Guard	This link takes you to screens where you can configure filtering of unauthorized
	DHCP and ARP packets in your network.
Loop Guard	This link takes you to a screen where you can configure protection against
	network loops that occur on the edge of your network.
VLAN Mapping	This link takes you to screens where you can configure VLAN mapping settings on
	the Switch.
Layer 2 Protocol	This link takes you to a screen where you can configure L2PT (Layer 2 Protocol
Tunneling	Tunneling) settings on the Switch.

	41
ES3500 Series User’s Guide