Chapter 26 IP Source Guard

 

 

 

 

Table 88 ARP Inspection VLAN Status

 

LABEL

DESCRIPTION

 

Reply

This field displays the total number of ARP Reply packets received from the VLAN since the

 

 

Switch last restarted.

 

 

 

 

Forwarded

This field displays the total number of ARP packets the Switch forwarded for the VLAN since

 

 

the Switch last restarted.

 

 

 

 

Dropped

This field displays the total number of ARP packets the Switch discarded for the VLAN since

 

 

the Switch last restarted.

 

 

 

26.6.2 ARP Inspection Log Status

Use this screen to look at log messages that were generated by ARP packets and that have not been sent to the syslog server yet. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection > Log Status.

Figure 125 ARP Inspection Log Status

The following table describes the labels in this screen.

Table 89 ARP Inspection Log Status

LABEL

DESCRIPTION

Clearing log status table

Click Apply to remove all the log messages that were generated by ARP packets

 

and that have not been sent to the syslog server yet.

 

 

Total number of logsThis field displays the number of log messages that were generated by ARP

 

packets and that have not been sent to the syslog server yet. If one or more log

 

messages are dropped due to unavailable buffer, there is an entry called overflow

 

with the current number of dropped log messages.

 

 

Index

This field displays a sequential number for each log message.

 

 

Port

This field displays the source port of the ARP packet.

 

 

VID

This field displays the source VLAN ID of the ARP packet.

 

 

Sender MacThis field displays the source MAC address of the ARP packet.

 

 

Sender IPThis field displays the source IP address of the ARP packet.

 

 

Num Pkts

This field displays the number of ARP packets that were consolidated into this log

 

message. The Switch consolidates identical log messages generated by ARP

 

packets in the log consolidation interval into one log message. You can configure

 

this interval in the ARP Inspection Configure screen. See Section 26.7 on page

 

230.

 

 

 

229

ES3500 Series User’s Guide