ZyXEL Communications ES3500 Series 28.3 Configuring VLAN Mapping, VID, Add, VID, Name, Port, Name, Port, Index, Active, Cancel, Cancel, Active, Delete, button, Cancel, Cancel, Delete, Priority

Chapter 28 VLAN Mapping

28.3 Configuring VLAN Mapping

Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as shown. Use this screen to enable and edit the VLAN mapping rule(s).

Figure 136 VLAN Mapping Configuration

The following table describes the labels in this screen.

Table 95 VLAN Mapping Configuration

LABEL	DESCRIPTION
Active	Check this box to activate this rule.
Name	Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Port	Type a port to be included in this rule.
VID	Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the packets and will be
	translated into the VID you specified in the Translated VID field.
Translated VID	Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in the packets will
	be translated.
Priority	Select a priority level (from 0 to 7). This is the priority level that replaces the customer
	priority level in the tagged packets or adds to the untagged packets.
Add	Click Add to insert the entry in the summary table below and save your changes to the
	Switch’s run-time memory. The Switch loses these changes if it is turned off or loses
	power, so use the Save link on the top navigation panel to save your changes to the non-
	volatile memory when you are done configuring.
Cancel	Click Cancel to reset the fields to your previous configuration.
Index	This is the number of the VLAN mapping entry in the table.
Active	This shows whether this entry is activated or not.
Name	This is the descriptive name for this rule.
Port	This is the port number to which this rule is applied.
VID	This is the customer VLAN ID in the incoming packets.
Translated VID	This is the VLAN ID that replaces the customer VLAN ID in the tagged packets.
Priority	This is the priority level that replaces the customer priority level in the tagged packets.
Delete	Check the rule(s) that you want to remove in the Delete column and then click the Delete
	button.
Cancel	Click Cancel to clear the Delete check boxes.

240
	ES3500 Series User’s Guide