ZyXEL Communications ES3500 Series Port, Apply, Active, Active, Cancel, 2-rate, DiffServ, DiffServ, IP Application, 3 Color Marker, Table 114 IP Application > DiffServ

Chapter 36 Differentiated Services

Click IP Application > DiffServ in the navigation panel to display the screen as shown. Figure 161 IP Application > DiffServ

The following table describes the labels in this screen.

Table 114 IP Application > DiffServ

LABEL	DESCRIPTION
Active	Select this option to enable DiffServ on the Switch.
Port	This field displays the index number of a port on the Switch.
*	Settings in this row apply to all ports.
	Use this row only if you want to make some settings the same for all ports. Use this row first
	to set the common settings and then make adjustments on a port-by-port basis.
	Note: Changes in this row are copied to all the ports as soon as you make them.
Active	Select Active to enable DiffServ on the port.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel to
	save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.

36.3.1 Configuring 2-Rate 3 Color Marker Settings

Use this screen to configure TRTCM settings. Click the 2-rate 3 Color Marker link in the DiffServ screen to display the screen as shown next.

	273
ES3500 Series User’s Guide