ZyXEL Communications ES3500 Series Add, Port, VLAN, Active, Cancel, Cancel, Delete, Delete, Cancel, Cancel, Priority, Instance, Path Cost, VLAN Range, Next click:, Active Port, Delete button

Chapter 13 Spanning Tree Protocol

Table 38 Advanced Application > Spanning Tree Protocol > MSTP (continued)

LABEL	DESCRIPTION
VLAN Range	Enter the start of the VLAN ID range that you want to add or remove from the VLAN range
	edit area in the Start field. Enter the end of the VLAN ID range that you want to add or
	remove from the VLAN range edit area in the End field.
	Next click:
	• Add - to add this range of VLAN(s) to be mapped to the MST instance.
	• Remove - to remove this range of VLAN(s) from being mapped to the MST instance.
	• Clear - to remove all VLAN(s) from being mapped to this MST instance.
Enabled VLAN(s)	This field displays which VLAN(s) are mapped to this MST instance.
Port	This field displays the port number.
*	Settings in this row apply to all ports.
	Use this row only if you want to make some settings the same for all ports. Use this row
	first to set the common settings and then make adjustments on a port-by-port basis.
	Note: Changes in this row are copied to all the ports as soon as you make them.
Active	Select this check box to add this port to the MST instance.
Priority	Configure the priority for each port here.
	Priority decides which port should be disabled when more than one port forms a loop in
	the Switch. Ports with a higher priority numeric value are disabled first. The allowed range
	is between 0 and 255 and the default value is 128.
Path Cost	Path cost is the cost of transmitting a frame on to a LAN through that port. It is
	recommended to assign this value according to the speed of the bridge. The slower the
	media, the higher the cost - see Table 31 on page 124 for more information.
Add	Click Add to save this MST instance to the Switch’s run-time memory. The Switch loses
	this change if it is turned off or loses power, so use the Save link on the top navigation
	panel to save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.
Instance	This field displays the ID of an MST instance.
VLAN	This field displays the VID (or VID ranges) to which the MST instance is mapped.
Active Port	This field display the ports configured to participate in the MST instance.
Delete	Check the rule(s) that you want to remove in the Delete column and then click the
	Delete button.
Cancel	Click Cancel to begin configuring this screen afresh.

138
	ES3500 Series User’s Guide