ZyXEL Communications ES3500 Series 8.7 Port Setup, Port, Name, Type, Delete, Cancel, Active, screens, characters, connections, ES3500 Series User’s Guide, then click the Delete button

		Chapter 8 Basic Setting
Table 16	Basic Setting > IP Setup (continued)
LABEL		DESCRIPTION
Delete		Check the management IP addresses that you want to remove in the Delete column,
		then click the Delete button.
Cancel		Click Cancel to clear the selected check boxes in the Delete column.

8.7 Port Setup

Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the navigation panel to display the configuration screen.

Figure 34 Basic Setting > Port Setup

The following table describes the labels in this screen.

Table 17 Basic Setting > Port Setup

LABEL	DESCRIPTION
Port	This is the port index number.
*	Settings in this row apply to all ports.
	Use this row only if you want to make some settings the same for all ports. Use this row first
	to set the common settings and then make adjustments on a port-by-port basis.
	Note: Changes in this row are copied to all the ports as soon as you make them.
Active	Select this check box to enable a port. The factory default for all ports is enabled. A port must
	be enabled for data transmission to occur.
Name	Enter a descriptive name that identifies this port. You can enter up to 64 alpha-numerical
	characters.
	Note: Due to space limitation, the port name may be truncated in some web configurator
	screens.
Type	This field displays 10/100M for Fast Ethernet connections and 10/100/1000M for Gigabit
	connections.

	93
ES3500 Series User’s Guide