2000W Generator
KNOW YOUR GENERATOR
Read this owner’s manual and safety rules before operating your generator.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Oil Fill/Drain | Engine ON/OFF Switch |
|
Fuel Tank
Circuit
Breaker (AC)
Spark Plug
120 Volt AC, 15 Amp
Fuel
Valve
Recoil Starter
Choke Lever
Air Cleaner
Receptacle
Data Tag
12 Volt DC, 8.3 Amp
Accessory Jacks
Grounding Lug
12 Volt DC, 8.3 Amp Accessory Jacks — May be used to power 12 Volt DC electrical devices or recharge 12 Volt DC batteries.
120 Volt AC, 15 Amp Receptacles — May be used to supply electrical power for the operation of 120 Volt AC, single phase, 60 Hz electrical lighting, appliance, tool and motor loads.
Air Cleaner — Protects engine by filtering dust and debris out of intake air.
Choke Lever — Used to manually provide proper starting mixture when engine is cold.
Circuit Breaker (AC) — Receptacles are provided with a
Data Tag — Provides model, revision and serial number of generator. Please have these readily available if calling for assistance.
Engine ON/OFF Switch — Used to stop a running engine.
Fuel
Fuel Tank — Capacity of 1.32 U.S. gallons (5.0 liters) of fuel.
Grounding Lug — Use this connection to properly ground the generator. See ”System Ground” on page 8.
Oil Fill/Drain — Access to oil fill dipstick and engine oil drain plug.
Recoil Starter — Used for starting the engine.
Spark Plug — Access to engine spark plug.
5