8.3 Status display
Status displays indicate the machine's current operation status.
Message | Operation status |
|
|
Initializing | Machine is being initialized. |
|
|
Start OK | Remote operation is ready. |
|
|
Cleaning | Processor is being cleaned. |
|
|
Heating | Processor is being heated. |
|
|
Exposing | Machine is exposing an image. |
|
|
Recovery | Machine is in recovery. |
|
|
Discharging | Plate is being discharged. |
8.4 Warning display
Message |
| Warning contents |
|
|
| ||
Pump Check | This indicates that it is time to replace the pump, so | ||
| please contact the dealer where you purchased this | ||
| machine and request a pump replacement. | ||
| Press the | key to clear this display and continue | |
| processing. |
|
|
|
| ||
Punch Dust Check | This indicates that the punch box is full of dust. | ||
| Open the plate setting cover and take out the punch box | ||
| to dispose of the dust. |
| |
| Pressing the | key resets the punch counter to "0". | |
|
| ||
Rinse Tank Check | Check the remaining amount of rinse water in the rinse | ||
| water replenishing bottle. Push the | key to delete the | |
| message. Be sure to reset the software counter in the | ||
| machine. Open the front door, and then close it to reset | ||
| the counter. For detailed information, refer to section "6.7 | ||
| Rinse". |
|
|
- 68 -