•Operation status
[Remote and local]
In the remote mode, it is possible to expose data transferred from the host computer (RIP computer). In the local mode, exposure data from the host computer (RIP computer) cannot be accepted.
The local mode includes a "User menu" (including user maintenance functions) and a "Maintenance menu".
[User menu]
[Maintenance menu]
The "User menu" provides the basic commands necessary to operate the machine.
If a command or a dialog for a command that is not included in the User
menu list appears, immediately press the 
key several times to return
to the User menu. (Do NOT press the 
key.) This menu is used to adjust the
[Standby mode]
In remote mode, if no command is sent to the machine for 10 minutes, it enters the standby mode.
The standby mode will be canceled whenever a command is given or
when any key on the panel except the 
key is pressed.
Note
Recovery time will differ depending on whether the machine has been in standby mode for more than 10 minutes. If the machine was left idle for more than 10 minutes, recovery will take longer because a cleaning routine is performed for the processor roller.
[Auto power OFF]
When this machine is left in the local mode for two hours, a cleaning routine is performed for the processor roller and the power is turned OFF automatically.
- 38 -