Chapter 2 Names of Machine Components and Parts
2.2 Operation panel
(1) | (2) | (3) | (4) | (5) |
| (6) | (7) | (8) |
(1) | Display panel |
|
|
| The operation mode, error messages, and setting values for various | ||
| parameters are displayed on this panel. |
| |
(2) | Power ON/OFF key |
|
|
| The power ON/OFF key is used to turn OFF the power after a processor | ||
| cleaning operation. This key is used for the usual ON/OFF operation. | ||
(3) | ON LINE lamp |
|
|
| The ON LINE lamp is lit during transmission or standby status between | ||
| the |
| |
(4) | LOADED lamp |
|
|
| The LOADED lamp lights when a film is loaded and at its exposure | ||
| position. |
|
|
(5)
Stop key (Reset)
The STOP key is used to interrupt the exposure of a plate. If the exposure is interrupted, the plate will be cut and discharged. This key is also used to cancel errors and to turn OFF the error buzzer.
(6)MENU key
The | MENU key is used to switch the user's mode between remote and local. |
Also it returns the menu to the upper level. | |
(7) | Select key |
The SELECT key is used to move the cursor or change parameters. | |
(8) | key |
The 
key is used to enter parameters or to execute various commands.
- 17 -