Mitsubishi Electronics SDP-ECO 1630 III manual Cleaning the washing tank

Chapter 7 Maintenance

GroovePin

Bearing for a	Exit roller (lower)
roller

14)Attach the bearing for a roller to the lower exit roller.

15)Install the lower exit roller by slightly rotating it in such a manner that the pin in the coupling properly engages the groove in the lower exit roller.

Note If the groove in the lower exit

roller properly engages the pin in the coupling, the lower exit roller rotates only counterclockwise.

16)Install the other necessary parts reversing the order of steps you followed when you removed them.

7.6 Cleaning the washing tank

Clean the washing tank every one month to prevent contamination with slime or mold.

Caution You must thoroughly read "1.3 Handling processing chemicals".

Processing

chemical Drain port for SLM-EST collection hole

1)Turn OFF the main power switch.

2)Lay out the maintenance mat.

3)Open the front door and remove the replenisher bottle.

4)Insert the SLM-EST drain port in the processing chemical collec- tion hole (located in the upper cover of the tank).

- 59 -