Washing tank
Attachment section
Washing tank
Washing tank
Guide plate
Washing tank
Washing |
| |
tank | Set screw | |
retainer | ||
|
14)Pull out the washing tank 30 to 40 mm toward the operator side and remove it (toward the right).
15)Clean the washing tank with water.
16)Insert the operator side of the washing tank into the rectangular slot in the processor. (See illustration on the left.)
Note | Slide the washing tank in | |
| ||
| horizontally. |
17)Set the back of the washing tank on the guide plate and insert the washing tank pressing it against the left side of the guide.
18)Secure the operator side of the tank with the washing tank retainer.
- 62 -