10Useful Adjustment Settings
Selecting a screen size automatically (AV mode only)
The Plasma Display automatically selects an appropriate screen size when video signals are received from a connected HDMI equipment (see page 33). To activate this function, use the following procedure.
1Press HOME MENU.
2Select “Option” (
/
then ENTER (ENTER/DISP.)).
3Select “Auto Size” (
/
).
4Select “On” (
/
).
Option |
|
Position |
|
Auto Size | On |
Item | Description |
Off | Deactivates the Auto Size function. |
On | Activates the Auto Size function. |
5Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.
NOTE
•Manually select an appropriate screen size if an image does not automatically switch to a correct screen format.
•When the video signal contains no aspect ratio information, the function will not work even with “On” selected.
Selecting a screen size for received 4:3 aspect ratio signals (AV mode only)
Specify whether the Plasma Display should choose the 4:3 mode or WIDE mode when 4:3 aspect ratio signals are received with the Auto Size function activated.
1Press HOME MENU.
2Select “Option” (
/
then ENTER (ENTER/DISP.)).
3Select “4:3 Mode” (
/
).
4Select “WIDE” or “4:3” (
/
).
Option |
|
Position |
|
Auto Size | On |
4:3 Mode | WIDE |
.
32
Item | Description |
|
WIDE | Wide image without side masks. |
|
|
| |
4:3 | Keeps the 4:3 aspect ratio and presents side masks. | |
|
|
|
| WIDE | 4:3 |
5Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.
En