Pioneer PRO-FHD1 Safety Precautions, Glass pieces in case the Plasma Display breaks

Page 9

Safety Precautions

Safety Precautions

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your product, please read the following precautions carefully before using the product.

1.Read instructions — All operating instructions must be read and understood before the product is operated.

2.Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future reference.

3.Observe warnings — All warnings on the product and in the instructions must be observed closely.

4.Follow instructions — All operating instructions must be followed.

5.Cleaning — Unplug the power cord from the AC outlet before cleaning the product. To clean the product, use the supplied cleaning cloth or other soft clothes (e.g., cotton, flannel). Do not use liquid cleaners or aerosol cleaners.

6.Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.

7.Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

8.When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

9.Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

10.Power source — This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

11.Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.

02

12.

The Plasma Display used in this product is made of glass.

 

 

Therefore, it can break when the product is dropped or

 

 

applied with impact. Be careful not to be injured by broken

English

 

glass pieces in case the Plasma Display breaks.

 

 

13.

Overloading — Do not overload AC outlets or extension

 

 

cords. Overloading can cause fire or electric shock.

 

14.

Entering of objects and liquids — Never insert an object

 

 

into the product through vents or openings. High voltage

 

 

flows in the product, and inserting an object can cause

 

 

electric shock and/or short internal parts. For the same

 

 

reason, do not spill water or liquid on the product.

 

15.

Servicing — Do not attempt to service the product yourself.

 

 

Removing covers can expose you to high voltage and other

 

 

dangerous conditions. Request a qualified service person

 

 

to perform servicing.

 

16.

Repair — If any of the following conditions occurs, unplug

 

 

the power cord from the AC outlet, and request a qualified

 

 

service person to perform repairs.

 

 

a. When the power cord or plug is damaged.

 

 

b. When a liquid was spilled on the product or when

 

 

objects have fallen into the product.

 

 

c. When the product has been exposed to rain or water.

 

 

d. When the product has been dropped or damaged.

 

 

e. When the product displays an abnormal condition. Any

 

 

noticeable abnormality in the product indicates that the

 

 

product needs servicing.

 

17.

Replacement parts — In case the product needs

 

 

replacement parts, make sure that the service person uses

 

 

replacement parts specified by the manufacturer, or those

 

 

with the same characteristics and performance as the

 

 

original parts. Use of unauthorized parts can result in fire,

 

 

electric shock and/or other danger.

 

18.

Safety checks — Upon completion of service or repair

 

 

work, request the service technician to perform safety

 

 

checks to ensure that the product is in proper operating

 

 

condition.

 

19.

Wall or ceiling mounting — When mounting the product

 

 

on a wall or ceiling, be sure to install the product according

 

 

to the method recommended by the manufacturer.

 

20.

Heat sources — Keep the product away from heat sources

 

 

such as radiators, heaters, stoves and other heat-

 

 

generating products (including amplifiers).

 

21.

Unplug the power cord from the AC outlet before installing

 

 

the speakers.

 

22.

Never expose the screen of the Plasma Display to a strong

 

 

impact, for example, by hitting it. The screen may be

 

 

broken, resulting in fire or personal injury.

 

23.

Do not expose the Plasma Display to direct sunlight for a

 

 

long period of time. The optical characteristics of the front

 

 

protection panel changes, resulting in discolouration or

 

 

warp.

 

24.

The Plasma Display weighs about 39.8 kg. Because it has

 

 

small depth and is unstable, unpack, carry, and install the

 

 

product with one more person at least and use the handles.

 

9

En

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Register Your Product at Enregistrez votre appareil sur PRO-FHD1STANDBY/ON Button STANDBY/ON IndicatorInformation to User For Canadian modelEnglish Contents ContentsAppendix Using External EquipmentInstallation guidelines Important User Guidance InformationUsage guidelines Important User Guidance Information Image Retention Panel sticking and after-image lagSafety Precautions Safety PrecautionsGlass pieces in case the Plasma Display breaks Wall-mount installation of the unit Side view diagram Rear view diagramMain unit Center lineAccessories Accessories Supplied AccessoriesPart Names Part NamesMain unit Operation panel on the main unitWhen handling the remote control unit Remote control unitSpeaker R terminals Connection panelUsing the optional Pioneer stand Operating Environment Installing the Plasma DisplayLocation Over 50 cmPreparation Using a wall for stabilizationPreventing the Plasma Display from Falling Over Stabilizing on a table or floorConnecting the speakers Connecting the power cordOrganize cables together using the provided speed clamps How to route cablesTo attach the speed clamps to the main unit To remove speed clampsAllowed operation range of the remote control unit Preparing the remote control unitOpen the battery cover Inserting batteriesUsing Muting on the remote control unit Plasma Display status indicatorsVolume adjustment Muting OperationUse the multiscreen functions Confirming current status Use the following procedure to select 2-screen modeAV Selection Splitting the screenAV mode Dot by Dot AV modePC mode Selecting a screen size manuallyMenu Setup Menu SetupUsing the menu Basic Adjustment Settings Basic Adjustment SettingsLanguage setting Basic picture adjustmentsUsing CTI Using Color TempUsing Color Management Color TempUsing the Dynamic Range Expander DRE functions Using the 3DYC and I-P ModeReducing the noise in images Effect of this function differs depending on signals Sound adjustmentsFront Surround ModeNo Signal off Power ControlPower Management Energy SaveAdjusting image positions AV mode only Switching the vertical drive frequency AV mode onlyAdjusting image positions and clock manually PC mode only Adjust the vertical position / or the horizontal positionSelecting an input signal type Useful Adjustment SettingsColor system setting You need to perform color system setting for each of INPUT5Selecting a screen size automatically AV mode only Using External Equipment Using External EquipmentUsing Hdmi Input Watching a decoder or VCR imageTo specify the type of digital video signals Connecting Hdmi equipmentTo specify the type of audio signals When using the INPUT2 or INPUT3 Hdmi terminalConnecting DVI equipment Using DVI InputConnecting a DVD player Watching a DVD imageWatching an image from a personal computer Enjoying a game console or watching camcorder imagesComputer compatibility chart Connecting control cordsSelect Setup / then Enter ENTER/DISP Select SR+ Select On About SR+Problem Possible Solution TroubleshootingAppendix Appendix Code Message CheckSpecifications AppendixTrademarks Avertissement Témoin STANDBY/ON Touche STANDBY/ONInformations destinées à l’utilisateur Pour le modèle destiné au CanadaTable des matières Table des matièresAnnexe Utilisation d’un équipement extérieurInstructions d’utilisation Instructions d’installationInformations importantes pour l’utilisateur Poignées placées à l’arrière de l’écran plasma Rémanence d’image sur le panneauRémanence Précautions de sécurité Précautions de sécuritéAccrochage de l’écran plasma à un mur 02 Précautions de sécuritéVue arrière NONUnité AxeAccessoires Accessoires Accessoires fournisNomenclture Panneau de commande de l’unité principaleNomenclture Unité principaleManipulation du Télécommande TélécommandePrises Speaker R Panneau des connexionsInstallation de l’écran plasma 06 PréparationPréparation Préparation Pour empêcher l’écran plasma de se renverserFixation sur une table ou au sol Raccordement des enceintes Raccordement du cordon d’alimentationComment faire cheminer les câbles Fixation des colliers rapides à l’écran plasmaPour retirer les colliers rapides Portée du boîtier de télécommande Préparation du boîtier de télécommandePrécautions relatives au boîtier de télécommande Mise en place des pilesUtilisation Utilisation de la touche Muting du boîtier de télécommandeUtilisation Témoins d’état de l’écran plasmaVérification de l’état actuel Utilisation des fonctions multiécransSélection AV Partage d’écranSélection manuelle d’un format d’écran Menus des modes AV Utilisation du menuMenus des modes PC Opérations du menuRéglages de base Réglages de baseChoix de la langue Réglages de base de l’imageUtilisation de Temp. Couleur 09 Réglages de baseUtilisation de CTI Utilisation de Gestion coulRéduction du bruit des images Contraste DynamiqueNiveau du Noir ’effet de cette fonction dépend du signal Utilisation de 3DYC et de Mode I-PRéglages du son Surround avantÉconomie d’énergie Commande alimentationGestion de l’énergie AV Gestion de l’énergie PCRéglez la position verticale / ou la position horizontale Réglage de la position de l’image mode AV seulementChoix du type de signal d’entrée Réglages utilesChoix du standard couleur 10 Réglages utiles Sélection automatique d’un format d’écran mode AV seulementUtilisation d’un équipement extérieur Utilisation d’un équipement extérieurPour regarder les images d’un décodeur ou d’un magnétoscope Utilisation de l’entrée HdmiBranchement d’un appareil Hdmi Appareil Hdmi Pour mettre en service la prise HdmiPour spécifier le type des signaux vidéo numériques Pour spécifier le type des signaux audioUtilisation de l’entrée DVI Appareil DVI Pour mettre en service la prise DVIAffichage des images d’un lecteur de DVD Branchement d’un appareil DVIAffichage de l’image d’une console de jeu ou d’un caméscope Affichage des images d’un ordinateur personnelAffichage des images d’un DVD Branchement d’un ordinateur personnelRésolution Fréquence Remarques Raccordement des câbles de commandeAffichage de l’image d’un ordinateur personnel Tableau de compatibilité ordinateurAnnexe AnnexeGuide de dépannage Anomalie Action corrective possibleCaractéristiques techniques Marques de commerceConforme à HDMI1.1 et HDCP1.1 Indicador STANDBY/ON Botón STANDBY/ONInformación al usuario Para el modelo canadienseEspañol Contenido Contenido12 Apéndice Utilización de un micrófono exteriorIndicaciones para la instalación Indicaciones para la utilizaciónInformación de orientación importante para el usuario Asideros en la parte trasera de la pantalla de plasma Imagen remanente del panelRetención de imagen Personal de servicio cualificado que lleve a cabo las Precauciones de seguridad Precauciones de seguridadInstalación de la unidad en una pared Precauciones de seguridadDiagrama de la vista posterior Diagrama de la vista lateral¡NO Accesorios Accesorios Accesorios suministradosNombres de los componentes Nombres de los componentesUnidad principal Panel de operación de la unidad principalCuando manipule el mando a distancia Mando a distancia16 Ω Panel de conexionesPreparación PreparaciónInstalación de la pantalla de plasma Prevención de queda de la pantalla de plasma Instale los pernos ganchos de prevenciónDe queda en la pantalla de plasma Conexión de los altavoces Conexión de cable de alimentaciónPara colocar las abrazaderas rápidas en la pantalla Cómo instalar los cablesPara extraer las abrazaderas rápidas Los cables podrán instalarse a la derecha o a la izquierdaInstalación de las pilas Preparación del mando a distanciaRango de operación permisible del mando a distancia Precauciones relacionadas con las pilasOperación Cambio del volumen y sonidoOperación Indicadores de estado de la pantalla de plasmaConfirmación del estado actual Empleo de las funciones de pantallas múltiplesSelección AV División de la pantallaPara la fuente de PC Selección manual de un tamaño de pantallaModo AV Modo PCMenús del modo AV Utilización de los menúsMenús del modo PC Operaciones con los menúsConfiguraciones básicas Configuraciones básicasConfiguración del idioma Ajustes de la imagen básicosUtilización de CTI Utilización de la temperatura de colorUtilización de la gestión del color Temperatura de colorReducción del ruido de las imágenes Contraste dinámicoNivel negro Utilización de 3DYC y del I-P Modo Ajustes del sonidoSurround frontal ModoAhorro de energía Control de la alimentaciónGestión de energía AV Gestión de energía PCAjuste la posición vertical / o la horizontal Ajuste de las posiciones de la imagen sólo el modo AVConfiguración del sistema de color Ajustes útilesSelección de un tipo de señal de entrada PANORÁMICA43 Conexión de un decodificador o de una videograbadora Empleo de la entrada HdmiDecodificador Videograbadora Conexiones para los conectores S-vídeoConexión del equipo Hdmi Utilización de un micrófono exteriorEquipo Hdmi Para activar el terminal Hdmi Para especificar el tipo de señales de vídeo digitalesVisualización de la imagen de un DVD Empleo de la entrada DVIConexión del equipo DVI Conexión de un reproductor de DVDReproducción con consola de videojuegos o videocámara Visualización de la imagen de un ordenadorVisualización de la imagen del DVD Conexión de un ordenadorVisualización de la imagen de un ordenador Conexión de los cables de controlGráfica de compatibilidad con ordenador Acerca de SR+Problema Solución posible Solución de problemas12 Apéndice ApéndiceApéndice EspecificacionesMarcas registradas Pioneer Corporation
Top Page Image Contents