JVC DLA-QX1G manual Controls and Features, Front Side / Top Surface / Right Side

Controls and Features

Front Side / Top Surface / Right Side

	1
1
	1
	2
2	3
9	4
8
7	21 6 5

1Handles

They are set in place when shipped from the factory. To carry this projector, use them. You can remove them if necessary. For details, refer to “To remove the handles” on page 9.

2Adjustable feet

They are set at the shortest position when shipped from the factory. Turn the foot to make the projector level. Adjustment can be made in the range of ±3.5° vertically and ±4.5° horizontally.

3Connector panel

For details, refer to “Connector Panel” on pages 12 and 13.

4Control panel

For details, refer to “Control Panel” on pages 10 and 11.

5AC IN (power input) terminal

This is the power input terminal where the supplied power cord is connected. For details, refer to “Connecting the Power Cord (Supplied)” on page 31.

6MAIN POWER switch

This is the main power switch. When it is turned on, the projector goes into stand-by mode, and the STAND BY indicator on the control panel comes on.

ON [ ❙ ]: The main power turns on.

OFF [‡]: The main power turns off.

7Remote sensor

When operating with the remote control unit, aim it at this sensor. An additional remote sensor is provided on the control panel of the projector. The effective operating distance of the remote control is about 32.8 ft (10 m) from each of the sensors. The effective operating range of angles is 50° horizontally, and 15° vertically.

8Lens mount

Attach a projection lens separately sold to this mount.

GL-MQ1010G	1	: 1 fixed-focus lens
GL-MQ1015SG	1.5 :		1 fixed-focus lens
GL-MQ1020ZG	2.1 :		1 to	4.9 : 1 zoom lens
GL-MQ1023SZG	3	: 1 to 7		: 1 zoom lens

For attaching or replacing the lens, consult your dealer who performed the installation and adjustments of your projector.

8