JVC DLA-QX1G manual General

Page 62

Specifications (Cont.)

General

• Power requirements

AC 200 V to 240 V, 50/60 Hz

• Power consumption

16 A (at 200V)

• Allowable operation temperature

+ 5°C to + 35°C (41°F to 95°F)

• Allowable relative humidity

90% or less (no condensation)

• Allowable storage temperature

– 5°C to + 60°C (23°F to 140°F)

• Maximum outside dimensions

Approx. (W)820 mm × (H)420 to 472 mm × (D)951 mm

 

(32-5/16˝ × 16-9/16˝ to 18-5/8˝ × 37-1/2˝)

 

(excluding protruding parts)

• Weight

Approx. 92 kg (203 lbs.)

• Accessories

(Refer to page 7.)

*Design and specifications are subject to change without notice.

*D-ILA devices are manufactured with a very high-precision technology, allowing 99.99% of the pixels to be effective. Only 0.01% or less of the pixels are missing or always illuminated.

*For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be more

or less different from actual products.

*TRADEMARKS

IBM ,IBM PC, and VGA are registered trademarks of International Business Machines Corporation. Macintosh is registered trademarks of Apple Computer, Inc.

VESA is a trademark of the non-profit organization Video Electronics Standard Association.

All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

60

Image 62
Contents For Customer Use Pour l’utilisateurPage DLA-QX1G About the plug U.S.A. only About burning-in of the D-ILA deviceImportant Safeguards Safety PrecautionsDo not allow any unqualified person to install the unit Information on the power cord plug Do not cut off the main plug from this equipmentContents Projection lens AccessoriesInformation on separately sold items Video Interface Card VICControls and Features Front Side / Top Surface / Right SideIntake area filter Left-hand side / Back SideTo remove the handles Control Panel About status code Connector Panel Projector Install the VICRemove the slot panel from the slot Fasten the VIC to the projectorRemote Control Unit Shutter ON/OFF buttons Wired remote control terminalLock Ô Unlock switch Shift +/- buttonsPrecautions for using batteries Installing BatteriesOpen the back cover Install the batteries Cursor 5/∞/2/3 / Enter Menu Operation ButtonWhen installing the projector, observe the following Installing the ProjectorPrecautions for Installation Allowable minimum space required305 mm Or more Leveling the projector Adjusting the Inclination of the ProjectorAdjusting the vertical angle of the projector Installing the Projector against the Screen Projection using stack configurationOptional Lenses Projection Distance and Screen SizeLens type Approximate projection distance Lens model FunctionLens Shift Function For the lenses with the lens shift functionRelational table for maximum shift amounts aspect ratio 4 Maximum amount of shiftUsing as a wired remote control unit Effective Range and Distance of the Remote Control UnitUsing as a wireless remote control unit Analog HD signals Connecting to Various DevicesSignals that Can Be Input to the Projector Digital HD signalsExamples of System Configuration Example of a basic systemConnecting to RGB Devices Desktop typeConnecting to Analog HD Devices Analog HD devicesDigital HD monitor Connecting to Digital HD DevicesDigital HD devices Connecting to Devices which Control the Projector Into the power input terminal AC Connecting the Power Cord SuppliedInsert the supplied power cord ProjectorRemote control unit Turning On the PowerTurn on the Main Power switch of the projector Basic OperationsCode display To change the menu language displayedSelecting the VIC to be projected Adjusting the Screen Size Adjusting FocusFor Operating Other Functions Turning off video image HideImage Keystone Press the Keystone / buttonsPress the Shift button Setting the amount of lens shifting ShiftPress the Shift + button No signal menu mode Menu OperationsRGB VIC menu mode Main menu Sub menuHdtv VIC or HD-SDI VIC menu mode To display the main menu To select or adjust the itemButtons and Control for Menu Operations To go to the sub menuMenu Operation Procedure Contents of the Menu For HDTV/HD-SDI VIC VIC menu VIC menu 1/2For RGB VIC Color temp. menu Options menuLanguage menu Sub brightness menuLens shift menu Offset & Gain menuUser 1 or 2 menu Menu position menuRemove the filters Cleaning and Replacing the FiltersRemove the filter cover Clean the filters Reinstall the filtersReplacing the Light-Source Lamp When the lamp’s use hours exceed 900 hoursWhen lamp’s use hours has reached 1000 hours Troubleshooting Corrective actionTroubleshooting Message Cause Corrective action Error code Cause Corrective action Unit ft m AppendixGL-MQ1010G GL-MQ1015SG GL-MQ1020ZG GL-MQ1023SZG Specifications RGB in RGB inputGeneral Outside dimensions Pin assignment Specifications for terminalsRS-232C external control Communication SpecificationsCommand Format