JVC DLA-QX1G manual Specifications, RGB in RGB input

Specifications

Optical mechanism system

• Projection method	3D-ILA device, 1 lens, 3 primary color optical shutter method
• D-ILA device	1.3" measured diagonally (2 048 pixels ×1 536 pixels) × 3 (Total number of pixels : 9 437 184)
• Projecting lens	GL-MQ1010G	1:1 fixed focus lens
(separately available)	GL-MQ1015SG	1.5:1 fixed focus lens
	GL-MQ1020ZG	2.1:1 to 4.9:1 zoom lens
	GL-MQ1023SZG	3:1 to 7:1 zoom lens
• Screen size	60" to 300" [recommended] to 867" [maximum] measured diagonally (*with aspect ratio : 4 : 3)
• Light-source lamp	2.0 kW xenon lamp

Electrical system

• Resolution	2 048 dots × 1 536 dots (QXGA full resolution, during RGB input)
• Scanning frequency	Horizontal frequency : 31.5 kHz to 135 kHz
	Vertical frequency : 48 Hz to 120 Hz
	(When HD signal is input, 24 Hz, 25 Hz, and 30 Hz are available.
	For details, refer to page 44.)

Input / output

[RGB IN (RGB input)]

	1-line, BNC × 5
	Analog RGB signal
	R	: 0.7V(p-p), 75Ω
	B	: 0.7V(p-p), 75Ω
	G	: 0.7V(p-p), 75Ω
	G on sync	: 1V(p-p), 75Ω (negative sync)
	Horizontal sync/composite sync signal (H/Cs)
	H	: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
	Cs	: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
	Vertical sync signal (V)
	V	: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
	* Some connected devices may not correspond to composite sync (Cs) or G on sync signal.
	Horizontal frequency
		: 31.5 kHz to 135 kHz
	Vertical frequency
		: 48 kHz to 120 kHz
	Dot clock	: 25 MHz to 280 MHz
[CONTROL]
• RS-232C IN	: 1-line, D-sub 9-pin × 1
	* RS-232C-interface specified control terminal for controlling this projector with a personal
	computer.
• RS-232C OUT	: 1-line, D-sub 9-pin × 1
	* RS-232C-interface specified control terminal for controlling other projectors with a personal
	computer connected to this projector.
• REMOTE	: 1-line, mini-jack × 1
			(To be continued on the next page)

ENGLISH

59