JVC DLA-QX1G manual mm Or more

Page 20

Installing the Projector (Cont.)

Precautions for Installation (Cont.)

■Observe the following when hanging the projector from the ceiling

•To prevent falling or overturning, it is recommended that the projector be fixed to its stand with bolts.

•When mounting the projector to the ceiling, first install a special shelf and then place the projector on it securely. For safety and maintenance purposes, a suitable facility is necessary to easily lift and lower the projector from the shelf for mainte- nance.

305 mm (12”)
or more
CONTROL
RGB Analog VIC
R	G	B
	Y	H/C

Image 20

Contents For Customer Use Pour l’utilisateurPage DLA-QX1G About the plug U.S.A. only About burning-in of the D-ILA deviceImportant Safeguards Safety PrecautionsDo not allow any unqualified person to install the unit Information on the power cord plug Do not cut off the main plug from this equipmentContents Accessories Information on separately sold itemsProjection lens Video Interface Card VICControls and Features Front Side / Top Surface / Right SideIntake area filter Left-hand side / Back SideTo remove the handles Control Panel About status code Connector Panel Install the VIC Remove the slot panel from the slotProjector Fasten the VIC to the projectorRemote Control Unit Wired remote control terminal Lock Ô Unlock switchShutter ON/OFF buttons Shift +/- buttonsInstalling Batteries Open the back cover Install the batteriesPrecautions for using batteries Cursor 5/∞/2/3 / Enter Menu Operation ButtonInstalling the Projector Precautions for InstallationWhen installing the projector, observe the following Allowable minimum space required305 mm Or more Leveling the projector Adjusting the Inclination of the ProjectorAdjusting the vertical angle of the projector Installing the Projector against the Screen Projection using stack configurationProjection Distance and Screen Size Lens type Approximate projection distanceOptional Lenses Lens model FunctionLens Shift Function For the lenses with the lens shift functionRelational table for maximum shift amounts aspect ratio 4 Maximum amount of shiftUsing as a wired remote control unit Effective Range and Distance of the Remote Control UnitUsing as a wireless remote control unit Connecting to Various Devices Signals that Can Be Input to the ProjectorAnalog HD signals Digital HD signalsExamples of System Configuration Example of a basic systemConnecting to RGB Devices Desktop typeConnecting to Analog HD Devices Analog HD devicesDigital HD monitor Connecting to Digital HD DevicesDigital HD devices Connecting to Devices which Control the Projector Connecting the Power Cord Supplied Insert the supplied power cordInto the power input terminal AC ProjectorTurning On the Power Turn on the Main Power switch of the projectorRemote control unit Basic OperationsCode display To change the menu language displayedSelecting the VIC to be projected Adjusting the Screen Size Adjusting FocusFor Operating Other Functions Turning off video image HideImage Keystone Press the Keystone / buttonsPress the Shift button Setting the amount of lens shifting ShiftPress the Shift + button No signal menu mode Menu OperationsRGB VIC menu mode Main menu Sub menuHdtv VIC or HD-SDI VIC menu mode To select or adjust the item Buttons and Control for Menu OperationsTo display the main menu To go to the sub menuMenu Operation Procedure Contents of the Menu For HDTV/HD-SDI VIC VIC menu VIC menu 1/2For RGB VIC Options menu Language menuColor temp. menu Sub brightness menuOffset & Gain menu User 1 or 2 menuLens shift menu Menu position menuRemove the filters Cleaning and Replacing the FiltersRemove the filter cover Clean the filters Reinstall the filtersReplacing the Light-Source Lamp When the lamp’s use hours exceed 900 hoursWhen lamp’s use hours has reached 1000 hours Troubleshooting Corrective actionTroubleshooting Message Cause Corrective action Error code Cause Corrective action Unit ft m AppendixGL-MQ1010G GL-MQ1015SG GL-MQ1020ZG GL-MQ1023SZG Specifications RGB in RGB inputGeneral Outside dimensions Pin assignment Specifications for terminalsRS-232C external control Communication SpecificationsCommand Format

Precautions for Installation (Cont.)

305 mm (12”)

or more