Installing the Projector (Cont.)
Effective Range and Distance of the Remote Control Unit
The remote control unit can be used as either a wireless remote control unit or a wired one.
■Using as a wireless remote control unit
Aim the remote control unit as the remote sensor on the front or control panel of the projector.
The operable distance of the remote control unit is about 32.8 ft (10 m) for direct reception. The remote control unit can be used by having its signal reflected on the screen. In this case, the total distance of “A + B” should be about 32.8 ft (10 m) or less. The operable angles of the remote control unit are 50° horizontally, 15° vertically.
50°
A
15°
B
■Using as a wired remote control unit
Connect the supplied remote control cable between the remote control unit and the REMOTE terminal on the connector panel of the projector.
Using it as a wired remote control unit, you do not have to worry about the operable angle of the unit, though the operable distance is limited by the length of the remote cable (approx. 49.2 ft (15 m)).
CONTROL
REMOTE |
OPERATE
| ENTER |
|
|
|
| NU |
|
LOCK |
| ME |
|
|
|
| |
|
| 3 |
|
| EXIT | VIC |
|
| 2 |
| |
UNLOCK | VIC | US | |
1 |
| ||
| VIC |
| FOC |
|
| IFT |
|
| T | SH | T |
| ZOOM | ON | |
|
| W | |
|
|
| OFF |
W
Note |
•When the remote control unit is used as a wired unit, its signal transmitter and projector’s remote sensor do not work.
CAUTION
•Do not extend the remote cable. Doing so could cause a malfunction of the projector.
24