JVC DLA-QX1G manual Left-hand side / Back Side, To remove the handles, Intake area filter

Controls and Features (cont.)

Left-hand side / Back Side

p q w e

9, w Intake area (filter)

Air is taken in through this area to cool the light-source lamp. If this area is blocked or if something that obstructs taking-in or exhausted air is placed around the projector, heat may build up inside and could cause a fire.

For details, refer to “Precautions for Installation” on pages 17 and 18.

CAUTIONS

•Be careful as paper, cloth or soft cushion could be drawn in if placed nearby. Do not block the intake area, or heat may build up and could cause a fire.

•Clean the filter periodically. Deposition of dirt on the filter works to reduce the cooling effect, causing heat to build up inside, which could cause a fire or malfunction.

For details, refer to “Cleaning and Replacing the Filters” on pages 48 and 49.

eExhaust vent (for the light-source lamp power supply) This vent dischrages warm air from the cooling fan for the light-source lamp power supply. This fan continues running as long as the MAIN POWER switch is on.

p, q Exhaust vents

Vents for cooling fans through which warm air comes out.

To remove the handles

Remove two screws fixing the handle to the projector with a hex wrench.

•Keep the handles and screws for future use.

Then, attach the supplied protective caps to cover the screw holes.

ENGLISH

9