Baldor MN850, Baldor manual Permanent Store Menu, Password Menu, Inputs Menu

Permanent Store Menu

Block Title	Parameter	Description
Permanent Store	Save Parameters	Saves all parameter values and overwrites previously saved values.
	Power on	Restores all parameter values to the values that were last saved (last power up cycle).
	Parameters	All parameter values changes since last power up are overwritten. Display blinks
		twice to confirm reset is complete.
	Default Parameters	Restores all parameter values to the factory settings. All parameter values are
		overwritten. Display blinks twice to confirm reset is complete.

Password Menu

Block Title	Parameter	Description
Password	Enter Password	If a password is set, it prevents unauthorized users from changing any parameter
		values. Value can be 0 to 255 (0=no password). If the correct password is entered,
		all parameters are unlocked. Parameter 5.
	Change Password	If the parameters are unlocked, a new password can be set using this option. Value can
		be 0 to 255 (0=no password). Parameter 5.
		Note: Remember your password. Removing power etc. will not clear the
		password. When a password is set, use Enter Password to unlock
		the parameters.
Inputs Menu
Block Title	Parameter	Description
Inputs	Digital i/p1	Input 1 is available at J10, terminals S1 (hot) and S0 (neutral). May be set as follows:
		Map to – Value can be parameter 0 – 112. Parameter 65.
		Bit number – Press “Optimise” to shift one position to the left. Press “⇑ ” to change that
		character to a logic 1. Press “⇓ ” to change that character to a logic 0.
		The value is stored in Parameter 66.
		Polarity – Value of each of the 8 I/O bits can be Positive or Inverse Logic. The value is
		stored in Parameter 54.
	Digital i/p2	Reserved for future use.
	Digital i/p3	Reserved for future use.
	Temperature i/p	Reserved for future use.
	4–20ma i/p	Reserved for future use.
	DC i/p	Reserved for future use.

MN850 Parameter Index 4-5