Baldor MN850, Baldor manual Parameter Description

Mapping to an Output Relay Most status values are stored in memory as status words.

The following is a list of these status words:

Parameter	Description	(128)	(64)	(32)	(16)	(8)	(4)	(2)	(1)
		10000000	01000000	00100000	00010000	00001000	00000100	00000010	00000001
8	Status 1	Stopping	Energy	Full	Dwell	Top of	Current	Starting	Stopped
			Saving	Conduction		Ramp	Limit
9	Status 2	4-20mA level	DC I/p level	Inhibit Start	Noise on	Forced	Stall	Overload	Alarm
		>P46	>P48		Power	Override		Integrating
10	Status 3	Red LED	Input 3	Input 2	Input 1	Relay K4	Relay K3	Relay K2	Relay K1
		(Not Used)
51	User Flag 1	Remote	Not Used	Thermistor	Low	Shearpin	Overload	Current	Kickstart
	(for first Param. set)	Starting		Selector	Current	Selector	Selector	Limit	Selector
					Selector			Timeout
52	User Flag 2	Zero Start	Second	Main	Remote	Keypad	Not Global	Not Global	Low
	(for first Param. set)	Time	Parameter	Contactor	Start/Stop	Start/Stop	Enable 2	Enable 1	Voltage
			Set						Soft–Stop
53	User Flag 3	Auto	Auto End	Auto Stop	Auto End	Inverted	User	User Flag 2	User Flag 1
	(for first Param. set)	Pedestal	Start		Stop	Control	Current	Polarity	Polarity
						Input	Limit
54	I/O Polarity	Red LED	Input 3	Input 2	Input 1	Relay K4	Relay K3	Relay K2	Relay K1
		Polarity
		(Unused)
86	Auto Config 2	Auto	Auto	Auto Stop	Auto	Auto Jog	Auto	Auto 3MC	(Unused)
		Pedestal	Endstart		Endstop		Bypass
95	User Flag 1	Remote	Not Used	Thermistor	Low	Shearpin	Overload	Current	Kickstart
	(for 2nd Param. set)	Starting		Selector	Current	Selector	Selector	Limit	Selector
					Selector			Timeout
96	User Flag 2	Zero Start	Second	Main	Remote	Keypad	Not Global	Not Global	Low
	(for 2nd Param. set)	Time	Parameter	Contactor	Start/Stop	Start/Stop	Enable 2	Enable 1	Voltage
			Set						Soft–Stop
112	Status 4	Thermal	Overload	Timeout	Thermistor	Under	Shearpin	RYB Phase	60Hz
		Switch				Current		Sequence

Each parameter is an 8 bit word and is used as a bit mask. Any bit of each word can be assigned to an output relay (K1, K2, K3 or K4).

MN850 Parameter Index 4-7