Toshiba R-TH10, B-492L owner manual 1Rewind$-!Motor 5%1Feed$-Motor%

Feed Motor

Rewind Motor

Rewind Motor

APPENDIX 4 SYSTEM MODE EO1-33032

A4.5 Printer Parameter Fine Adjustment

A4.5 Printer Parameter Fine Adjustment (Cont.)

NOTES:

1.The fine adjustment value equals the sum of the fine adjustment values set by the PC command and this parameter. The maximum

ribbon motor voltage fine adjustment value is −15.

When the addition of values reaches the maximum, the value remains unchanged even if subsequent fine adjustments are made.

2.Each step corresponds to 5% of the standard voltage and up to 75% of the voltage can be decreased. Only for the feed motor, the voltage can be increased up to 50%.

3.Please make this adjustment if ribbon errors occurs though the ribbon has not jammed or ended.

If the problem cannot be resolved, please contact your nearest TOSHIBA TEC service representative.

Ribbon Motor Voltage Fine Adjustment (Feed/Rewind Motor)

With this parameter you can fine adjust the Ribbon Motor Voltage (Torque). With “<3>ADJUST SET” displayed, press the [PAUSE] key 7 times to enter the Ribbon Motor Voltage Fine Adjustment (Rewind Motor) 5%1menu$. '-￿%.!￿￿

. 5%1$'-￿):!￿￿

To change the screen to the Ribbon Motor Voltage Fine Adjustment (Feed Motor), press the [PAUSE] key again.

5%1Rewind$'-￿):!Motor￿￿ 5%1Feed$'-￿Motor%.!￿￿

[RESTART]

[FEED] 5%1 $'-￿ ):!￿￿￿ 5%1 $'-￿ %.!￿￿￿

[FEED] key: Pressing the [FEED] key once causes a –1 step

change, down to –15 steps.

[RESTART]key: Pressing the [RESTART] key once causes a +1 tone change, up to +0.

After completing the fine adjustment, press the [PAUSE] key.

A4-12