Toshiba R-TH10, B-492L owner manual Test Print, Inserting the Optional Pcmcia Cards

2. PRINTER SETUP EO1-33032

2.10 Test Print

2.9Inserting the Optional PCMCIA Cards (Cont.)

3.The following PCMCIA cards can be used.

Type	Maker	Description		Remarks
	San Disk	A card conforming to
ATA Card		the PC card ATA		----------
	Hitachi
		standard
		Ether Link III 3C589D		Install into the slot (1)
		PC card
				only. (This card
LAN Card	3 COM	Megahertz®
				installed into the slot
		10M bps LAN PC Card
				(0) will not work.)
		3CCE589ET Series
	Maxell	EF-1M-TB		Capacity: 1MB
			AA
	Mitsubishi	MF-81M1-GBDAT01		Read only
	Maxell	EF-4M-TB	CC	Capacity: 4MB
		EF-4M-TB		Readable/writable
			DC
	Centennial	FL04M-15-11119-03
	Technologies
Flash Memory	INC.
	INTEL	IMC004FLSA
Card
	Simple	STI-FL/4A		Capacity: 4MB
	TECHNOLOGY
				Read only
	Mitsubishi	MF84M1-G7DAT01
	PC Card KING	FJN-004M6R
	MAX
	PC Card	FJP-004M6R

2.10 Test Print

A print test should be performed to check that the printer is operating correctly. During this test, the printer will first issue a blank page of media to allow the sensors to detect the Black Mark or Label Gap. Then it will print five pages of slanted lines followed by five pages of sample bar codes then finally by printing five pages that contain characters of various sizes.

For the test print procedure, please refer to Appendix 4.6 Test Print.

2-13