Toshiba B-492L, R-TH10 owner manual Product Overview, Introduction Features, Unpacking, Accessories

1. PRODUCT OVERVIEW EO1-33032

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for choosing the TEC B-492L/R series barcode printer. This Owner’s Manual contains valuable information from general set-up to confirming the printer's operation using test prints. You should read it carefully to help you gain maximum performance and life from your printer. This manual should be kept close at hand for everyday reference. Please contact your TOSHIBA TEC representative for further information concerning this manual.

1.2 Features

The B-492L/R printer has the following features:

∙Superior hardware, including a specially developed 12 dots/mm (300 dots/inch) thermal print head which gives very clear print quality at print speeds of 127 mm/sec. (5 inches/sec.), 203.2 mm/sec. (8 inches/sec.), and 254 mm/sec. (10 inches/sec.).

∙Separation of the power supply unit realized a compact body of the printer.

∙When the optional interface board is installed, Web functions such as remote maintenance and other advanced network functions are available.

∙The PCMCIA Interface Board and the KB-80-QM Keyboard Unit are provided as optional equipment.

1.3 Unpacking

NOTES:

1.Check for damage or scratches on the printer. However, please note that TOSHIBA TEC shall have no liability for any damage of any kind sustained during transportation of the product.

2.Keep the cartons and pads for future transportation of the printer.

1.4Accessories

Unpack the printer as per the Unpacking Instructions supplied with the printer.

U

When unpacking the printer, please check that the following accessories are supplied with the printer.

U

Owner’s Manual (1 copy) (Doc./No. EO1-33032)

TEC Label/Tag Printer

B-492-QQ

Owner?s Manual

TOSHIBA TEC CORPORATION

U

US Power Cord (1 pc.) (P/No. FBCB0030202)

Fan FilterUCD-ROM

(P/No. FMBB0036801) (P/No. FMQB0083801)

U

EU Power Cord (1 pc.) (P/No.: EKA-0055001)

1- 1