Toshiba B-492L, R-TH10 owner manual A1.4 Ribbon

APPENDIX 1 SPECIFICATIONS EO1-33032

A1.4 Ribbon

A1.4 Ribbon

Please make sure that the ribbon being used is approved by TOSHIBA TEC. The warranties do not apply to any problem caused by using non-approved ribbons.

For information regarding TOSHIBA TEC approved ribbon, please contact a sales representative.

Type	Spool type
Width	41 – 112 mm (1.6” to 4.4”)
	41, 68, 84 and 112 mm (1.6”, 2.7”, 3.3”, 4.4”) are recommended.
Length	600 +10, -0 m (Max.)
Outside Diameter	φ90 mm (φ3.5”) (Max.)

NOTES:

1.To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.

2.To avoid ribbon wrinkles use a ribbon which is the correct width for each media width used.

It is possible to use narrower ribbons than media width, however, the effective print width also narrows

Ribbon width	41 mm	68 mm	84 mm	112 mm
Proper media width	20 to 36 mm	36 to 63mm	63 to 79 mm	79 to 112mm

A1- 5